Well this is my new location, it is very close to my home, what is positive, but on the other hand there is a owner who is a little bit of nerve wracking. well at least i will look to work faster. First i thought i will work the central pod or cockpit inside, but since i stowed the tools and all the materials in the room, there is not much space left. and ofcourse the doors are to small. The pod is 2.3 m x 2.5m, and the door is only 2.2 m high. So I decided to erect the plastic shed again but this time smaller, 

On the new location I started with building a cockpit

 

on each side a storage box, which is 60 cm wide and 40 cm deep

supported in the middle 

reinforcements in the middle

turned around and bottom of the lockers on both sides glued on, and that is the stage of building on 7th of April

10th of April, the hole cut out for outboard well

In DecemberIhadtomoveto boat to a new location. First I had to disassemble the plastic shad, and of course when we finished snow started to fall. With the cleaning I had a lot to do through the whole December and in the whole January. I needed quite some time to get used to the new location. For me it was like a psychological barrier.

The next day hulls were covered with frozen snow.

We transported hull by hull.

Neighbours that helped my son and the tractor driver.

Catamaran on the streets of Ptuj.

Since my last entry in april 2022 a lot of things happened. I am not going to explain all the pictures but quite a progres ha been made to date. in december i had to move from my original destination to a new place. I was not happy but it had to be done.

building the cabin pod 

 

the bodom turned upside down

turned cabin from the inside

boat tour

already painted

the cabin again

I made L profiles from glass fibers reinforced with carbon

between the hull and the L profile beam nr. 2 and 3 is seating, and screwed through the bulkhead and L profile 

front beam arrangement for fastening, through pads bolts are coming out, and then a SS bar across the beam will hold down the beam 

the video shows also the inside of the boat