Haka - story of the catamaran

I decided to close the middle cabin, I have been working late in the night, so I didn’t have time to update. Here are some pictures of the cabins. Now sanding and painting will follow. My deadline is still beginning of August.

And that s how it was,

and now after the working day

29 th of June

dagerboard

case

front cabin-toilet

hatch cover

Engine box

Now you can see the whole arrangement around the engine box

I started to make hinges on ruder case, first i glued on the styrodur,

around the plastic pipe i laminated a strip of fibre ( 7 cm wide), i laid on more fibres that will fix the ring on plastic pipe to the rudder case,

and here is the video

Today i assembled the front mast, it consists out of two pols, they have A shape, and the crab claw will hang in between. I did a model out of styrodur (i had to get the angel)for a bracket that will be placed on the front cabin.

Bracket

Today on 22th of April i made hinges for rudders, and yesterday i did spars for crab claw sail. They are 8 m long and glued from two pices of wood 40 X 30 mm, and 4 m long.

Again i used styrodur as a model.

I got a new helper

Many things had happened from my last report, I finished the rudders except painting, on Thursday I finished one engine pod, the videos are below. I also painted the laminated floor of the cabin pod, and on Sunday 8th of April finished the last pole - mast ( A mast). Lamination of one more box is waiting on me, that means one more day.

Sanding the edges of the box,

wetting out fibers on the table, putting them on the styrodur,

additional wetting out fibers, the tricky part was turning of the box but we laid the plastic and a strap and some clamps and we did it with no problem unfortunately i have no pictures of that operation.

thanks to the epoxy, we had enough time, the whole process of lamination lasted for about 5 hours by the environmental temperature of about 18⁰C.

In the end we put everything under pressure.

On Monday the 6th of April I went to the guy who is making CNC machines. I used a NACA 0010 digits to make the profile.

Otherwise i laminated the inside edges of the cabins, painted the pillar for steering, and other small thing that you can see on the picture, I also, already glued the styrodur rudders together, so they are ready for lamination (length of 2,2 m). Now I will have to make hinges on hulls and on the rudder case. On both sides the hinges will be out of fiber.

Inside of the cabins in the cabin pod.

The covers for the cabin are also done.

Rudders ready for painting.

Rudders wit cases.

In january and beginning of february there was not much going on regarding to building. Temperatures in january were below zero, also during the day. It was time for winter activities like sledding. But it was also time for doing some planing behind computer. I looked for videos on youtube about construction of self made wind vane. Should it be a servopedulum, ore a trim tab. I thinke i decided for servo pendulum. A man is doing a CNC machines for carpenters and to try it out he will make my rudders out of styrodur so i am waiting for that. On my boat i won't have a GPS. I won't trust like i dumy blindeles the technology, what when satellites "fell from the sky", and uncle Sam doesn't wont to "give the signal" any more. The political situation wright now isn't rosy, but any way i don't wanne by one of dose who are driving to work every day the same road and they blindly follow the navigation (we say arround the ass into the pocket). So i am buying a sextant, not new one, on ebay there are some used ones and in good condition, but i am waiting for the "right price". I red books about celestial navigation and watch videos, for the moment just sextant is missing for practising the navigation. I will also try to keep plastic out of my boat as much as possible. In the kitchen i will use glass and SS instead. Also for storing water i am not gone use bottled water.

Nothing done outside, he survived the snow.

I painted the well.

the third coat today, i hanged the will on a rope so i could painted all at once, i will do one more coat.

Aut of astrological calendar the steering wheel is slowly emerging. Today i cuted the central peces what took me quite some time. than i roughly cut of the excess wood.